Expansion Slot Covers - HP ProLiant DL385 G7 Maintenance And Service Manual

Remove the PCI riser cage.
5.
To replace the component, reverse the removal procedure.

Expansion slot covers

CAUTION:
remove all AC power cords before removing or installing the PCI riser cage.
CAUTION:
expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize
the amount of time the access panel is open.
Power down the server (on page 26).
1.
Extend or remove the server from the rack
2.
server from the
Remove the access panel
3.
If any full-length expansion boards are installed, remove the full-length expansion board shipping
4.
bracket.
Remove the PCI riser cage
5.
Remove the expansion slot cover:
6.
To prevent damage to the server or expansion boards, power down the server and
For proper cooling do not operate the server without the access panel, baffles,
rack" on page 27).
("Access panel" on page 33).
("PCI riser cage" on page 43).
("Remove the server from the
Removal and replacement procedures 44
rack" on page 27, "Extend the