System Board - HP ProLiant DL385 G7 Maintenance And Service Manual

Remove the power supply cage assembly.
10.
To replace the component, reverse the removal procedure.

System board

To remove the component:
Power down the server (on page 26).
1.
Remove all power supplies
2.
Remove the server from the rack (on page 27).
3.
Remove the access panel
4.
Remove the PCI riser cage
5.
Remove the battery pack
6.
Remove the air baffle
7.
Remove the power supply backplane
8.
CAUTION:
remove all AC power cords before removing or installing the PCI riser cage.
Remove the hot-plug fans from the fan cage
9.
Remove the fan cage
10.
Remove all DIMMs ("DIMMs" on page 65).
11.
("Hot-plug power
("Access panel" on page 33).
("PCI riser cage" on page 43).
("Removing the battery
("Air baffle" on page 53).
("Power supply
To prevent damage to the server or expansion boards, power down the server and
("Fan cage" on page 54).
supply" on page 31).
pack" on page 49).
backplane" on page 37).
("Hot-plug fan" on page 35).
Removal and replacement procedures 70