Processor - HP ProLiant BL460c G7 Maintenance And Service Manual

Processor

WARNING:
internal system components to cool before touching them.
CAUTION:
cache sizes. Refer to the label on the processor heatsink for a description of the processor.
CAUTION:
socket with a processor socket cover and a heatsink blank or a processor and a heatsink.
IMPORTANT:
server blade does not power up.
To remove the component:
Update the system ROM.
1.
Locate and download the latest ROM version from the HP website (http://www.hp.com/support).
Follow the instructions on the website to update the system ROM.
Power down the server blade (on page 23).
2.
Remove the server blade (on page 24).
3.
Remove the access panel
4.
Remove all hard drives
5.
Remove all hard drive blanks
6.
Remove the hard drive backplane
7.
Remove the front panel/hard drive cage assembly
8.
33).
Remove the heatsink ("Heatsink" on page 38).
9.
Open the processor locking lever and the processor socket retaining bracket.
10.
Using the processor tool, remove the processor from the system board:
11.
To reduce the risk of personal injury from hot surfaces, allow the drives and the
To prevent possible server malfunction, do not mix processors of different speeds or
To prevent possible server blade overheating, always populate each processor
Processor socket 1 must always be populated. If processor socket 1 is empty, the
("Access panel" on page 25).
("Hard drive" on page 26).
("Hard drive
("Hard drive
blank" on page 26).
backplane" on page 32).
("Front panel/hard drive cage
Removal and replacement procedures 40
assembly" on page