Table of Contents
Advertisement
Removal and replacement procedures
Required tools
You need the following items for some procedures:
•
T-15 Torx screwdriver (provided inside the access panel)
•
HP Insight Diagnostics software
Safety considerations
Before performing service procedures, review all the safety information.
Preventing electrostatic discharge
To prevent damaging the system, be aware of the precautions you need to follow when setting up the system
or handling parts. A discharge of static electricity from a finger or other conductor may damage system
boards or other static-sensitive devices. This type of damage may reduce the life expectancy of the device.
To prevent electrostatic damage:
•
Avoid hand contact by transporting and storing products in static-safe containers.
•
Keep electrostatic-sensitive parts in their containers until they arrive at static-free workstations.
•
Place parts on a grounded surface before removing them from their containers.
•
Avoid touching pins, leads, or circuitry.
•
Always be properly grounded when touching a static-sensitive component or assembly.
Server blade warnings and cautions
WARNING:
remove the server blade access panel and then install the server blade into the enclosure.
WARNING:
internal system components to cool before touching them.
CAUTION:
blade in this manner results in improper airflow and improper cooling that can lead to thermal
damage.
CAUTION:
and/or the system. However, it may be necessary to leave the server blade powered up when
performing other operations, such as hot-plug installations or troubleshooting.
("HP Insight
To reduce the risk of shock or injury from high-current electrical energy, do not
To reduce the risk of personal injury from hot surfaces, allow the drives and the
Do not operate the server blade with the access panel removed. Operating the server
When performing non-hot-plug operations, you must power down the server blade
Diagnostics" on page 57)
Removal and replacement procedures 22
Hide quick links:
Advertisement
Table of Contents
