Remove The Server Blade - HP ProLiant BL460c G7 Maintenance And Service Manual

Hide thumbs Also See for ProLiant BL460c G7:

Datasheet (4 pages)

Table Of Contents

Table of Contents

•

Press and release the Power On/Standby button.

This method initiates a controlled shutdown of applications and the OS before the server blade enters

standby mode.

•

Press and hold the Power On/Standby button for more than 4 seconds to force the server blade to enter

standby mode.

This method forces the server blade to enter standby mode without properly exiting applications and the

OS. It provides an emergency shutdown method if an application stops responding.

•

Execute one of the following commands using the Onboard Administrator CLI:

poweroff server [bay number]

poweroff server [bay number] force

The first command initiates a controlled shutdown of applications and the OS before the server blade

enters standby mode. The second form of the command forces the server blade to enter standby mode

without exiting applications and the OS. This emergency method forces a shutdown if an application

stops responding.

•

Use the Onboard Administrator GUI to initiate a shutdown:

Select the Enclosure Information tab, and then select the Overall checkbox in the Device Bays item.

Initiate a shutdown from the Virtual Power menu:

—

Select Momentary Press to initiate a controlled shutdown of applications and the OS.

—

Select Press and Hold to initiate an emergency shutdown of applications and the OS.

IMPORTANT:

To remove all power from the server blade, remove the server blade from the enclosure.

After initiating a virtual power down command, be sure that the server blade is in standby mode by

observing that the system power LED is amber.