Identify the battery location
10.
Remove the battery.
11.
IMPORTANT:
configuration. After replacing the battery, reconfigure the system through RBSU.
To replace the component, reverse the removal procedure.
Server blade release lever
To remove the component:
Power down the server blade (on page 23).
1.
Remove the server blade (on page 24).
2.
Remove the access panel
3.
Remove all hard drives
4.
Remove all hard drive blanks
5.
Remove the hard drive backplane
6.
Remove the front panel/hard drive cage assembly
7.
33).
("System board
components" on page 66).
Replacing the system board battery resets the system ROM to its default
("Access
panel" on page 25).
("Hard
drive" on page 26).
("Hard drive
blank" on page 26).
("Hard drive
backplane" on page 32).
("Front panel/hard drive cage
Removal and replacement procedures 54
assembly" on page