Remove The Server Blade; Remove The Access Panel - HP ProLiant BL495c G6 User Manual

•
Use the enclosure GUI to initiate a shutdown:
Select the Enclosure Information tab, then select th
a.
Initiate a shutdown from the Virtual Power menu:
b.
—
Select Momentary Press to initiate a controlled shutdown of applications and the OS.
—
Select Press and Hold to initiate an emergency shutdown of applications and the OS.
IMPORTANT:
provided. To
enclosure.
After initiating a virtual power down command, be sure that the server blade go into standby mode by
observing that the system power LED is amber

Remove the server blade

To remove the component:
Identify the proper server blade.
1.
Power down the server bla
2.
Remove the server blade.
3.
Place the server blade on a flat, level work
4.

Remove the access panel

To remove the component:
Power down the server blade (on page
1.
Remove the server blade (on page 12).
2.
Press the access panel release button.
3.
Slide the access panel towards the rear of the server blade, and then lift to remove the panel.
4.
When the server blade are in standby mode, auxiliary power is still being
remove all power from the server blade, remove the server blade from the
.
de (on page 11).
11 ).
e Overall checkbox in the Device Bays item.
surface.
Operations 12