•
Use the Onboard Administrator GUI to initiate a shutdown:
Select the Enclosure Information tab.
a.
In the Device Bays item, select the Overall checkbox.
b.
From the Virtual Power menu, initiate a shutdown of applications and the OS:
c.
—
For a controlled shutdown, select Momentary Press.
—
For an emergency shutdown, select Press and Hold.
Before proceeding, verify that the server blade is in standby mode by observing that the system power
LED is amber.
Remove the server blade
Identify the proper server blade.
1.
Power down the server blade (on page 14).
2.
Remove the server blade.
3.
Place the server blade on a flat, level work surface.
4.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, properly ground the server blade
before beginning any installation procedure. Improper grounding can cause ESD.
Remove the access panel
To remove the component:
Power down the server blade (on page 14).
1.
Remove the server blade (on page 15).
2.
Place the server blade on a flat, level work surface.
3.
Press the access panel release button.
4.
Operations 15