Changing A Drive Id Plug; Inserting A Drive Id Plug - DEC 4000 600 series Owner's Manual

The drive ID plugs have prongs on the back that indicate the bus
Changing a
Drive ID Plug node number (and by default, the unit number) of the drive.
Change a drive ID plug as shown in Figure 6–6.
•
•
Figure 6–6 Inserting a Drive ID Plug
A
B
C
D
To remove a drive ID plug, grasp it firmly and pull it straight
out.
To insert a drive ID plug, align the two center prongs with
the two center slots and press the plug into the slots.
Changing Drive ID Numbers
1
E
System Configuration
MLO-008859
6–23