cdp
Configure DSSI parameters.
Synopsis
cdp [-{a,i,n,o,u}] [-sn] [-sa allclass] [-su unitnum] [dssi_device]
Description
The
from the console terminal without connecting to a node's DUP
server. The parameters that are modified are the DUP task
parameters: NODENAME, ALLCLASS, and UNITNUM.
If you enter
displays parameters for all DSSI devices in the system.
Parameters
Parameter
dssi_device
Flags
Flag
-a
-i
-n
-o
-u
-sa allclass
command allows you to modify DSSI device parameters
cdp
without an option or target device, the system
cdp
Description
Name of the DSSI device or DSSI controller.
Only the parameters for this device or the
devices on this controller will be modified.
Description
Sets device allocation class, ALLCLASS.
Selective interactive mode, for setting all
parameters.
Sets device node name, NODENAME (up to
16 characters).
Overrides warning messages.
Sets device unit number, UNITNUM.
Sets the allocation class (ALLCLASS) for
all DSSI devices in the system to the value
specified.
cdp
Console Commands 3–7