Inserting A Tape Into The Tlz06; Removing A Tape From The Tlz06 - DEC 4000 600 series Owner's Manual

Operating the TLZ06 Tape Drive
Inserting a Tape To insert the DDS tape into the TLZ06 (Figure 5–7):
into the TLZ06
1. Check to see that the tape/activity light on the drive is unlit.
2. Set the write-protect switch on the DDS tape that you wish
3. Insert the DDS tape into the drive, with the tape oriented as
Removing a To remove a DDS tape from the TLZ06 (Figure 5–7):
Tape from the
1. Check to see that the tape/activity light is on solid green. If
TLZ06
2. Press the unload button to eject the tape
3. Remove the tape from the drive
5–18 Operating Mass Storage Devices
If it is lit, there is already a tape in the drive. Remove the
tape from the drive before continuing. (See Removing a Tape
from the TLZ06, below).
to insert to either the write-protected
position.
shown in .
the tape/activity light is flashing, the drive has not finished
completing a data transfer. Wait until the tape/activity light
comes on solid green before proceeding.
The tape ejects part way.
or write-enabled
.
.