Operating the TZ30 Tape Drive
Remove
Tapes Before
Power-Down
Removing a
To remove a tape from the TZ30 drive (Figure 5–13):
Tape from the
1. Press the Unload button
TZ30
2. Move the cartridge lever to the unlock position
3. Remove the tape from the drive
5–34 Operating Mass Storage Devices
Remove tape cartridges from the TZ30 before turning off
power to the drive or the system. Failure to do so can
damage the cartridge and tape drive.
The yellow light flashes while the tape rewinds. Wait for the
tape to rewind fully: The beeper will sound twice and the
green light will come on.
The cartridge ejects.
Caution
.
.
.