Examples; Synopsis; Description; Continue - DEC 4000 600 series Owner's Manual

continue

continue
Resume program execution on the specified processor.

Synopsis

continue

Description

Continues execution on the specified processor, or the primary
processor if a processor is not specified. The processor begins
executing instructions at the address that is currently in the
program counter. The processor is not initialized.
The
the system state and if you halted the system by one of two
methods: either by pressing the Halt button on the operator
control panel or by entering Ctrl/P on the console terminal.

Examples

In the following example, a system is commanded to resume
operating system mode.
>>> continue
In the next example, a system's second processor is commanded
to resume operating system mode.
>>> continue &p1
3–10 Console Commands
command is only valid if you have not disturbed
continue
Some console commands, for example,
the machine state so that program mode cannot be
successfully resumed. If program mode cannot be
successfully resumed, you may need to reset the system.
Note
boot , may alter