Olivetti d-Copia 1600 Service Manual page 103

Problem
(4) Paper in the first paper
A paper jam in the feeder is extremely curled.
paper feed section is
Check if the paper feed pul-
indicated during
ley, separation pulley or for-
copying (no paper
ward pulley in the first paper
feed from the drawer
feeder is deformed.
2).
Jam code 12
Broken registration switch
actuator.
Defective registration
switch.
Check if the drawer paper
feed clutch 1 malfunctions.
Electrical problem with the
drawer paper feed clutch 1.
(5) Paper in the second paper
A paper jam in the feeder is extremely curled.
paper feed section is
Check if the paper feed pul-
indicated during
ley, separation pulley or for-
copying (no paper
ward pulley in the second
feed from the drawer
paper feeder is deformed.
3).
Jam code 13
Broken drawer feed switch
1 actuator.
Defective drawer feed
switch 1.
Check if the drawer paper
feed clutch 2 malfunctions.
Electrical problem with the
drawer paper feed clutch 2.
(6) Paper in the third paper
A paper jam in the feeder is extremely curled.
paper feed section is
Check if the paper feed pul-
indicated during
ley, separation pulley or for-
copying (no paper
ward pulley in the third
feed from the drawer
paper feeder is deformed.
4).
Jam code 14
Broken drawer feed switch
2 actuator.
Defective drawer feed
switch 2.
Check if the drawer paper
feed clutch 3 malfunctions.
Electrical problem with the
drawer paper feed clutch 3.
Causes/check procedures Corrective measures
Change the paper.
Check visually and replace any deformed pulley.
Check visually and replace registration switch if its actuator is bro-
ken.
Run maintenance item U031 and turn registration switch on and
off manually. Replace registration switch if indication of switch is
not light.
Run maintenance item U032 and select the drawer paper feed
clutch 1 to be turned on and off. Check the status and remedy if
necessary.
Check.
Change the paper.
Check visually and replace any deformed pulley.
Check visually and replace drawer feed switch 1 if its actuator is
broken.
Run maintenance item U031 and turn drawer feed switch 1 on
and off manually. Replace drawer feed switch 1 if indication of
switch is not light.
Run maintenance item U032 and select the drawer paper feed
clutch 2 to be turned on and off. Check the status and remedy if
necessary.
Check.
Change the paper.
Check visually and replace any deformed pulley.
Check visually and replace drawer feed switch 2 if its actuator is
broken.
Run maintenance item U031 and turn drawer feed switch 2 on
and off manually. Replace drawer feed switch 2 if indication of
switch is not light.
Run maintenance item U032 and select the drawer paper feed
clutch 3 to be turned on and off. Check the status and remedy if
necessary.
Check.
2HA/2HB
1-4-7