Advertisement
Check the following list to be sure a service call is really necessary.
If surface burner fails to light:
• check to be sure unit is properly connectedto power supply,
• check for a blown circuit fuse or a tripped main circuit breaker.
• check to be sure burner is correctly rated for your type of gas.
• check to be sure burner ports or ignition ports are not clogged.
• checktobesureigniterisdryandclicking.
Burnerwillnotlightifigniterisdamaged,
soiled or wet. If igniter doesn't click, turn control knob OFF.
• air may be in the gas line, (See p. 12.)
If the flame is uneven:
• burner ports may be clogged.
• flame setting may need to be adjusted.
If surface burner flame lifts off the ports:
• check to be sure a pot is sittingon the grate above.
• contactan authorizedJenn-Air Service Contractor.
If surface burner flame is yellow in color:
• contactan authorizedJenn-Air Service Contractor.
If nothing on the range operates:
• check for a blowncircuitfuse or a trippedmain circuitbreaker.
• check if rangeis properlyconnectedto electriccircuitin house.
If clock, indicator words, and/or lights operate but oven does not
heat:
• the controlsmay have been set incorrectly.
• clockcontrolsmay be set for delayed start of oven.
If the oven light does not work:
• the lightbulb is loose or defective.
• oven lightdoes not work duringself-cleaningprocess.
If oven will not go through self-cleaning process:
• controlsmay be improperlyset.
• door may not be locked.
• checkthe "Clean"and "Stop"timesettingsandthe currenttime of day onthe clock.
If oven did not clean properly:
• oven may need longercleaning time.
• excessivespillswere not removedpriorto self-cleaningprocess.
42
Advertisement
