Advertisement
Checkthe followinglist to besurea service callisnecessary.
If foods do not broil properly:
• the control may not be set properly.
If surface burner fails to light:
• check to be sure unitis properlyconnectedto power
• checkrackposition.
supply.
If baked food is burned or too brown on top:
• check for a blowncircuitfuse or a trippedmaincircuit
• foodmaybe positioned incorrectly in oven,
breaker.
• ovennotpreheatedproperly,
• checkto be sureburneriscorrectly ratedforyourtypeof
If foods bake unevenly:
gas,
• the ovenmay be installed improperly.
• check to be sureburnerportsor ignition portsare not
• checkthe ovenrackwitha level.
clogged.
• stagger pans,do not allow pans to touch each other or
• checkto be sure igniterisdry and clicking. Burnerwill not
oven wall.
light if igniter is damaged,soiled or wet. If igniterdoesn't
• check instructions for suggested placement of pans on
click,turn control knob OFF.
oven rack.
• Air may be in the gas line. (see page 9.)
If oven baking results are less than expected:
If the flame is uneven:
• the pansbeingused may not be of the size or material
• burnerportsmay be clogged,
recommended forbestresults.
• flame settingmay needto be adjusted.
• theremaynotbesufficient roomaroundsidesofthepans
for properaircirculation in the oven.
If surface burner flame lifts off the ports:
• checkinstructions for preheating, rackposition and oven
• checkto be surea potis sitting on the grateabove,
temperature.
• contact a n authorized Jenn-AirServicer.
If baking results differ from previous oven:
If surface burner flame is yellow in color:
• oventhermostat calibration may differbetweenold and
• contact an authorized Jenn-AirServicer.
new ovens. Followrecipe and use and care directions
If nothing on the range operates:
before callingfor service since the calibrationon the
previousovenmay have driftedto a too highor too low
• checkfor a blowncircuitfuse or a trippedmain circuit
setting.(See page25 - Adjusting OvenTemperature.)
breaker.
If F plus a number appear in the Display:
• check if range is properlyconnectedto electriccircuitin
• A faultcode is beingshown.When a fault code appears
house,
and a continuousbeep sounds,touch the Cancel Pad. If
If clock, indicatorwords,and/or lights operate but
the faultcode reappears, d isconnect p owerto the oven
oven does not heat:
and callan authorized Jenn-AirServicer.
• the controlsmayhave beenset incorrectly.
• clockcontrolsmay be setfordelayedstartof oven.
If YOU Need Service
If the oven light does not work:
• call the dealer from whom your appliancewas
purchasedor call Jenn-Air CustomerAssistance,
• the lightbulb is looseor defective.
Maytag AppliancesSales Company tO locate an
• ovenlightdoes notworkduringself-cleaning process,
authorized servicer. Your Jenn-Air Servicer can
If oven will not go through self-cleaning process:
provide betterandfasterserviceifyoucanaccurately
describe problems andgivemodeland serialnumber
• controls may be improperly set.
• doormay notbe locked.
• checkthe "Clean"and"Stop"timesettings andthecurrent
)f owner
timeof day on the clock,
warrantyservice.
• if the dealer or servicecompanycannotresolvethe
If oven did not clean properly:
problem write to Jenn-Air CustomerAssistance.
• ovenmay needlongercleaning time.
MaytagAppliancesSales Company,P.O.Box 2370,
• excessive spillswere notremovedpriorto self-cleaning
Cleveland, T N 37320-2370,orcall1-800-688.1100or
process.
423-472-3333.
If oven door will not unlock:
• use and care manuals,servicemanuals,and parts
• oven may not have cooledto safe temperatureafter
catalogs are available from Jenn-Air Customer
self-cleaning process.
Assistance, M aytagAppliances SalesCompany.
26
Advertisement
