3D Systems Cube User Manual page 29

These icons permit you to view your creation in various view points. After selecting a particular view, place your cursor on the
part and hold the mouse button down; rotate the print pad to view different angles of the part.
Isometric Right Side
Click on "Color" and choose "Background" and
select a color for your software background.
To change your creation color, select "Model" and
choose color.
NOTE: The color you select for either background
or model does not affect the color of your part to
be created. The part color will be the color od print
material used.
Choose how you want to view your 3D Creation
size; inches or millimeter.
Turn Raft and Supports ON or OFF by clicking on
the buttons.
Choose your Print Mode
Hollow: Part will be hollow - less material is used.
Solid: Part will be solid- more material is used.
Strong: Normal print.
Cube Model: Select your Cube and then select the
print material. The Cube 2nd Generation can print
using all materials; Cube can only print with ABS.
Click on the Info button to view your creation informa-
tion.
To save your creation without printing, click on save.
The changes that you made to the Creation will be
saved.
Left Side Front Side
Back Side Top Side Bottom Side
29