Flange Back Adjustment - Santec VTC-8120WDP User Manual

2.3.4 Flange back adjustment

The camera has a CS-mount lens thread. Depending on the used lens it may be necessary
to use the C-mount adapter (which is included in this delivery).
If still no focus can be achieved at the lens, you have the option of using the flange back
adjusting lever (only advisable for experienced users!):
Loosen the little lock screw below the flange back adjusting lever, using the Allen wrench
(which is included in this delivery).
Now carefully turn the lever left or right to adjust the flange back. Fasten the little lock screw
again.
_________________________________________________________________________________
VTC-8120WDP / VTC-8122WDP / VTC-8320WDP / VTC-8322WDPU
lock screw for flange
back adjusting lever
- 40 -
Bedienungsanleitung / User manual
ring for flange back
adjustment