Camera Adjustment Via Osd Menu (Only Available With Optional Keyboard) - Santec VTC-HDH359IRPU User Manual

Bedienungsanleitung / User Manual
VTC-HDH359IRPU/G / VTC-HDH359IRPU/W

3. Camera adjustment via OSD menu (only available with optional keyboard)

The camera adjustments are already made and the camera is hence ready to be used.
However, if you nevertheless need to make changes to the camera settings, you can do so
by using an optional keyboard (e.g. SANTEC keyboard KSC-3505; not included in the
delivery) to call up an OSD menu.
The used protocol is Pelco D (also see page 45).
On the used keyboard, press "Open iris" to call up the menu in the video picture. Now you
can move the joystick up/down/left/right to navigate through the menu.
Up/down:
Select function.
If a confirmation is required in the menu, press „Open iris" on your keyboard.
To exit the setting, press „Exit" and then „Open iris" to confirm.
Setup menu:
In the setup menu, you can select the following functions and change their respective
settings:

Lens
 Exposure

White Balance
 Backlight
 Day & Night
 DPC (Dead Pixel Compensation)
 Special

Reset
 Exit
_________________________________________________________________________________
- 35 -
Left/right:
Change setting/value.