Santec VTC-8120WDP User Manual page 44

Setup page 2:
Further adjustments can be made by pressing onto the joystick.
Level calibrate:
Press the joystick to adjust the level calibration.
The electronic water level is an optical tool to assist the user to install the camera in a proper
horizontal position.
Adjust the camera properly. Once this is done, thus the LED lights up in blue, press the
joystick down to confirm.
Current min / max:
The camera is able to emit error messages (cf. page 35).
Move the joystick left/right to define as of which minimum/maximum current draw an error
message should be generated.
(The pre-defined values can be kept unchanged.)
Camera current:
Press the joystick to display the present current power consumption of the camera module in
the camera.
Setup page 1:
Return to the first page.
Exit:
Exit the OSD menu and save the adjustments.
Note:
If no adjustments are being made in the OSD for a couple of seconds, it will close
automatically.
_________________________________________________________________________________
VTC-8120WDP / VTC-8122WDP / VTC-8320WDP / VTC-8322WDPU
If the LED is blue, the camera is positioned horizontally.
If the LED is yellow, the camera is tilted too far right.
If the LED is red, the camera is tilted too far left.
- 44 -
Bedienungsanleitung / User manual