Osd For Illuminated Logo And Strip - Santec VTC-8120WDP User Manual

Bedienungsanleitung / User manual
VTC-8120WDP / VTC-8122WDP / VTC-8320WDP / VTC-8322WDPU
2.3.5 OSD for illuminated logo and strip (settings for self-testing)
(not adjustable via RS-485
Cameras VTC-8320WDP and VTC-8322WDPU are
two basic functions:
a. A „detection" function which serves as tool to indicate whether the camera has
been moved after its installation; this is also a sabotage protection or
positioning protection.
b. An „electronic water level" which serves as adjustment tool during the
installation.
LED for
electronic
water level
Note:
Please note that this adjustment cannot be made via the RS-485 camera interface but it is
only possible via the mini-joystick located on the camera rear.
The illumination settings apply to all camera models (VTC-8120WDP, VTC-8122WDP,
VTC-8320WDP and VTC-8322WDPU):
_________________________________________________________________________________
equipped with a G-sensor which has
illuminated strip
- 41 -
illuminated camera logo