Santec VTC-8120WDP User Manual page 51

Bedienungsanleitung / User manual
VTC-8120WDP / VTC-8122WDP / VTC-8320WDP / VTC-8322WDPU
RS-485 (A / B ): (only for VTC-8320WDP and VTC-8322WDPU):
The camera can be adjusted by a serial communication (RS-485), according to the Pelco D
protocol. The camera OSD is activated using the SET-PRESET 95 command. This
command is also used as a confirmation (ENTER) (not applicable for G-sensor OSD and
light OSD):
In the camera OSD, the communication parameters have to be set correctly to the connected
device, e.g. a keyboard (also see chapter "Communication").
UTP A / UTP B: (only for VTC-8320WDP and VTC-8322WDPU):
Besides a BNC video output, this camera has a UTP output (twisted pair). An active twisted
pair transmitter is built-in into the camera.
GND:
Ground connection for camera, connected with metal housing.
N/A:
not applicable
_________________________________________________________________________________
- 51 -