Injection Panel Chemical Solution Tank Installation Instructions - US Water Systems 385-GWU-1000 Owner's Manual

Injection Panel Chemical Solution Tank Installation Instructions

1. Place the chemical solution tank close to the injection panel. Drill a 1/4" hole in the top of
the chemical tank. Push the 1/4" tubing in the hole in the tank.
2. Pull the 1/4" tubing from inside the tank up through the fill hole. Then push on the weighted
strainer on the 1/4" Tubing.
Installation, Operation and Maintenance Manual
385-GWU-1000, 385-GWU-1500, 385-GWU-2000
27