Table of Contents
Advertisement
Components which cannot be fi ltered out
Length of power cord
Power protection device
Overheating protection devices
(inside isolation transformer)
Manufacturer and retailer
※
All figures given are for a water temperature of 20 °C.
※
This product cannot convert hard water into soft water.
※
The total volume of water coming out of the main spout and drain hose is given as the run-through
water volume and daily volume of water used.
Note 1: The water which can be used as alkaline ion water and acidic water is equivalent to about 80% of
the filtration flow volume.
Note 2: This period may be shorter depending on the water quality and usage environment.
Note 3: This value is for a removal rate of 80% based on JIS S 3201 tests.
Note 4: This value is for a filtration flow volume of 50% based on JIS S 3201 tests.
Note 5: This period applies when 30 liters of water are used a day. If 60 liters are used a day, the cartridge
usage limit will be approximately one-half. The period may also be significantly less depending on
the amount of water used and on its quality and pressure.
Iron dissolved in water, heavy metals (silver, copper, etc.),
salt (seawater)
Approx. 3 m
Current fuse: 2.5 A
Overheating protector (automatic resetting type, activated at
temperature of 120 °C)
Thermal fuse (activated at temperature of 145 °C)
Panasonic Electric Works Co., Ltd.
1048, Kadoma, Osaka 571-8686, Japan
75
Hide quick links:
Advertisement
Table of Contents
