Control Panel Parts And Their Functions - Panasonic TK-AS40 Instruction Manual

Control Panel Parts and Their Functions

Cartridge Life Lamps
(Yellowish-green, Yellow)
These indicate the operating life of
the filter. (See page 48.)
These indicators light up when water
is running through the main unit and
for approximately 30 seconds after
the water flow is stopped.
32
Water Flow Adjustment Lamp (Red)
This lamp will blink when the water flow from the main
spout is too large.
(See page 36.)
Generating Lamp (Yellowish-green)
This lamp is lit when the main unit is generating
alkaline ion water or acidic water. (See pages 34, 35.)
If it is not lit while water is running through, that means
the main unit is not electrolyzing, so the water coming
out is purified water.
Water Quality Selector Buttons
Selects the water quality. (See page 34.)
Water Quality Indicator Lamps
This indicates the quality of the water coming from
the main spout. (See page 34.)
Continue Button • Lamp (Yellowish-green)
Press this button to continue to use the same water
quality. (See pages 34, 35.)
Reset Button
Press this button after replacing the cartridge.
(See page 51.)
Cartridge Replacement Lamp (Red)
This lamp informs you when it is time for replacement.
(See pages 48, 51.)
About the Indicator Lamps on the Control Panel
This instruction manual will show the state of
lamps on the control panel as follows:
[Lamp not Lit] [Lamp Lit] [Lamp Blinking]