Measuring The Ph Level; (Ion Concentration) - Panasonic TK-AS40 Instruction Manual

Measuring the pH Level (Ion Concentration)/ 測定 pH 值 （離子濃度）
After the Alkaline Ionizer has been installed or after it has not been used for a prolonged period
(generally, a week or more), be absolutely sure to measure the pH level, and check that it is within the
"pH standard" before using the Alkaline Ionizer.
Remember to measure the pH level periodically (at least once a month).
設置後或長時間（標準：約一週以上）停止使用時，務必測試 pH 值，請確認是否為「pH 的標準」範圍
內後再使用。日後請定期測試（一個月一次以上） 。
What to have ready: pH test kit (supplied accessory)/準備的物品：pH 值測試套件（配件）
■ Procedure for measurement/測試的方法
1
Allow two drops of the pH test liquid to
drip into the test cup.
滴 2 滴 pH 試劑於試杯內
The pH level cannot be measured accurately if more than two drops are
used.
2 滴以外無法正確判定結果。
2
Run water treated by the Alkaline Ionizer (alkaline ion water or
acidic water) through for at least 10 seconds
(so that a stable pH level will be measured).
讓生成水 ( 鹼性離子水或酸性水 ) 流水超過 10 秒以上
( 為了測試穩定的 pH 值 )
3
Pour the test water into the test cup.
將測試水倒入試杯內
If some of the test water is first collected in a glass and
then poured into the test cup, it will be easier to align
the level with the line inside the test cup.
So long as the water inside the test cup is within 5 mm
above or below the line, no problems will be posed in
the pH level measurement: there is no need to adjust
the level until it comes up to the exact level of the line.
事先將測試水放入杯內等再倒入採水試杯內，較容易核
對杯上標準線條。
倒入水量，只要在杯線約 5 毫米上下的範圍內，都能判
定結果，不必配合杯線重新測定。
4
Under the enough light,
compare the result with
the pH Chart.
在光線明亮的地方與 pH 值圖表
相比較
The color of the test water will change
as time passes. Compare its pH level
against the pH Chart right away.
經過一段時間測試水的顏色會產生變化。請勿置放過久時間立即與 pH 值圖表比對測試結果。
26
Pour the water until it
is near the line inside
the test cup
倒入至杯線為止
pH Chart
pH 值圖表
Alkaline Level 3/鹼 3 段
Alkaline Level 2/鹼 2 段 8.5 ～ 9.5
Alkaline Level 1/鹼 1 段
Acidic Water/酸性
pH standard
pH 的標準
9 ～ 10
8 ～ 9
5 ～ 6.5