Panasonic TK-AS40 Instruction Manual page 17

Attaching the Bypass Selector (continued)/安裝分水開關（接續）
• Keep all parts that are not used during installation, as they may be needed later if the unit is moved or the faucet
is changed.
• 沒有使用到的零件，請妥善保存，以備搬家或購買新水龍頭時之需求。
Faucet without an aerator
• Water faucet which can attach the Alkaline Ionizer with
accessory.
無充氣器的水龍頭時
• 需用一附件才能將電解水生成器連接到水龍頭上。
Return to the original
position after removing.
卸下後，將其放回原位。
Do not remove the gasket
inside the bypass selector.
不要卸下分水開關內的墊片。
Remove the screws.
(4 pcs.)
卸下螺絲（4 個） 。
Installation adaptor
(Accessory)
安裝轉接器（附件）
16
➀
1
Mounting nut
螺帽
Adaptor
(Not used)
轉接器
（不使用）
2
Mounting nut
螺帽
Bulge
➀
膨脹部
➁ ➁
➀
more than 10 mm
➁
greater than 13 mm, less than 24 mm
➀
10 毫米以上
➁
在 13 ～ 24 毫米之間
Remove the mounting nut and
adaptor.
卸下螺帽和轉接器。
Insert the installation adaptor,
and tighten it with the mounting
nut.
插入安裝轉接器並用螺帽將其緊固。