Arm Home; Quick Arming; Instant Arming; Forced Arming - Rosslare HomeLogiX HLX-40 User Manual

Advanced wireless security panel
Hide thumbs Also See for HomeLogiX HLX-40:
Table of Contents

Advertisement

Operating the HLX-40
If the user arms the system as AWAY by remote control, a squawk
acknowledgement is produced twice in the local sounders.
3.3.2

Arm Home

Home arming is an arming of all perimeter sensors and detectors as defined by
the installer. This is intended for when home or office is occupied.
To arm the sy stem using HOME:
1.
Verify that the system is ready for arming.
2.
Press the HOME arming key.
3.
Enter your user code.
If the user arms the system as HOME by remote control, a squawk
acknowledgement is produced twice in the local sounders.
3.3.3

Quick Arming

Quick arming allows arming the system without code entry. If Quick Arming is
enabled (by the installer during setup), a long press on one of the arming
buttons activates Quick Arming.
3.3.4

Instant Arming

If Instant Arming mode is enabled (by the installer during configuration), the
system skips the exit delay, cancels the entry delay configured, and initiates the
alarm, which instantly causes an alarm to go off upon violation of any zone.
When EN-CENELEC standard is enabled, only the Master user can use
this feature.
To instantly arm the sy stem:
1.
Verify that the system is ready for arming.
Press either the HOME or the AWAY arming key.
2.
3.
Enter your user code.
4.
Press the same arming key once again. (If EN-CENELEC standard is
enabled, enter your Master user code once again.)
3.3.5

Forced Arming

If Forced Arming is enabled, the system is able to arm even when zones are in
violation (open) but not defined as bypassed. In such a case, the system arms,
effectively bypassing the open zone. Once the open zone is closed, the system
completes arming, adding the previously bypassed zone to the monitored
zones.
3.3.6

Exit Delay

An exit delay enables the user to arm the system and exit the site through a
specified door (determined as a delay zone) using a predetermined path after
arming the system, without setting off an alarm.
HomeLogiX™ HLX-40 User Guide
13

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HomeLogiX HLX-40 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Homelogix hlx-40aHomelogix hlx-40b

Table of Contents