Printing On Glossy Cardstock - Xerox WorkCentre 6025 User Manual

Printing on Glossy Cardstock

You can print on Lightweight Glossy Cardstock that is 163 g/m² or less.
• Do not open sealed packages of glossy cardstock until you are ready to load them into the printer.
• Leave glossy cardstock in the original wrapper, and leave the packages in the shipping carton until
ready to use.
• Remove all other paper from the tray before loading glossy cardstock.
• Load only the amount of glossy cardstock you are planning to use. Do not leave glossy cardstock in
the tray when you are finished printing. Replace unused cardstock in the original wrapper and seal.
• Rotate stock frequently. Long periods of storage in extreme conditions can cause glossy cardstock to
curl and jam in the printer.
• In the print driver software, select the desired glossy cardstock type or select the tray loaded with
the desired paper.
To optimize printing on glossy cardstock, do one or more of the following:
• Adjust the paper type setting. For details, see
• Adjust the bias transfer roller. For details, see
• Adjust the fuser. For details, see
Adjusting Paper Type
Adjusting the Bias Transfer Roller
Adjusting the Fuser on page 133.
®
Xerox
on page 132.
®
WorkCentre 6025 Multifunction Printer
Paper and Media
on page 132.
79
User Guide