Xerox WorkCentre 6025 User Manual page 160

Troubleshooting
Symptom
Vertical blanks
Slanted printing
Colors are blurry or there is white
area around objects
®
160 Xerox WorkCentre
User Guide
Cause
Condensation inside the printer
causes partial blanks or creased
paper.
The lenses are being blocked.
The printer is worn or damaged.
The toner cartridges are not
®
Xerox toner cartridges.
The paper guides are not
correctly adjusted to the paper
size.
Color-to-color alignment is not
correct.
®
6025 Multifunction Printer
Solution
Turn on the printer and leave it on for at
least one hour remove the condensation.
For assistance, go to the Xerox
website at
www.xerox.com/office/WC6025support.
Clean the lenses inside of the printer. For
details, see Cleaning the LED Lenses
page 127.
For assistance, go to the Xerox
website at
www.xerox.com/office/WC6025support.
Replace the toner cartridges with
®
genuine Xerox toner cartridges. For
details, see Consumables
Reset the paper tray guides. For details,
see Loading Paper on page 69.
Perform an automatic color registration
adjustment. For details, see
Registration on page 131.
®
Support
on
®
Support
on page 136.
Color