Connect The External Diskette Drive - Toshiba Tecra 500CS User Manual

000-book.bk : 02-start.fm5 Page 24 Wednesday, May 15, 1996 3:50 PM
24
Let's Start at the Very Beginning...

Connect the External Diskette Drive

Removing a memory module
2 Pull the clips away from the memory module.
The memory module pops partially out of the slot.
3 Carefully remove the module from the slot.
4 Replace the memory slot cover, following steps 10 through
13 in the previous section.
Connect the External Diskette Drive
The computer's external 3 1/2" diskette drive is useful for install-
ing programs on the hard disk, exchanging information with other
systems, and making backup copies of the files stored on your
hard disk.
If you prefer, you can remove the CD-ROM drive (optional in the
Tecra 500 CS) and install the diskette drive into the SelectBay.
Part I: Getting To Know Your Computer
Clips