Connecting The External Diskette Drive - Toshiba Portégé 650CT User Manual

20
Let's Start at the Very Beginning

Connecting the External Diskette Drive

Removing a Memory Module
To remove a memory module, follow these steps:
1 Turn the computer off.
2 Unplug the computer.
3 Close the display and remove any cables you may have
connected.
4 Turn the computer upside down.
5 Use a small Phillips screwdriver to remove the screw that
secures the memory slot cover.
6 Lift up the memory slot cover and remove it.
Removing a memory module
7 Push the metal clips away from the memory module until it
pops up.
8 Pull the module out of the slot.
Connecting the External Diskette Drive
The Portégé 650CT's external 3.5-inch diskette drive is useful for
installing software on the hard disk, exchanging information with
other systems, and making backup copies of the files stored on
your hard disk.
Part I: Getting To Know Your Computer
Metal clips
Memory module