Windows 95 Isn't Working - Toshiba Tecra 500CS User Manual

000-book.bk : 15-trbl.fm5 Page 331 Thursday, May 16, 1996 2:07 PM
If your hard disk is intact, Setup installs Windows 95 again with-
out removing information you have saved on the hard disk. Fol-
low the messages that appear on your screen.
If you receive another error message, contact Toshiba technical
support. See "If You Need Further Assistance" on page 357.

Windows 95 Isn't Working

Once you are familiar with the desktop and used to the way
Windows 95 responds to your work routine, you can easily
detect if Windows 95 isn't working correctly. For example:
Windows 95 fails to start after the Starting Windows 95 mes-
sage appears.
Windows 95 takes a long time to start.
Windows 95 does not follow its normal routine.
The display on your screen looks different.
Unless a hardware device has failed, these problems usually occur
when you change the system configuration, add a device, install a
new program, or do something that changes the system's estab-
lished routine.
If you experience any of these problems, use the startup options in
the Windows 95 Startup Menu to fix them.
Using Startup Options to Fix Problems
If Windows 95 fails to start properly, you may have to change
your system's configuration or verify the startup procedure to fix
the problem. To do this, use the startup options in the Windows 95
Startup menu. This section describes each startup option and when
to use the procedure.
To open the Windows 95 Startup menu:
1 Restart your computer.
2 Press
Part I: Getting To Know Your Computer
If Something Goes Wrong...
Windows 95 Isn't Working
when your computer starts.
F8
331