Toshiba Tecra 500CS User Manual page 114

000-book.bk : 04-basic.fm5 Page 113 Wednesday, May 15, 1996 3:50 PM
The front of the computer
1 Use one of these methods to make the connection between
the two computers:
2 On one of the computers, click Start, then point to
Programs.
3 Point to TranXit2, then point to TranXit.
Windows 95 opens the TranXit program.
4 Choose Connection from the Setup Menu.
5 If an appropriate Configured Connection is available,
choose it and go on to step 9. Otherwise, continue with the
next step.
6 Choose the appropriate type of connection in the
Connection Type list.
7 Click the Setup Connection button.
8 Choose the port setting for the computer and click OK.
Part I: Getting To Know Your Computer
Transferring Files to Another Computer
For a serial connection, connect the serial cable to the serial
port on the back of your computer. Connect the other end
of the cable to the serial port on the other computer.
For a parallel connection, connect one end of the parallel
cable to the parallel port on the back of your computer.
Connect the other end to the parallel port on the other
computer.
For an infrared connection, aim your computer's infrared
port directly at the infrared port on the other computer. The
two computers must be within 3 feet (1 meter) of each
other. You can only use one of the computer's infrared
ports at a time.
113
Learning the Basics
Infrared port