Toshiba Tecra 500CS User Manual page 332

000-book.bk : 15-trbl.fm5 Page 353 Thursday, May 16, 1996 2:07 PM
5 Reconnect the computer and NoteDock, making sure to
press them together firmly.
Refer to "Connecting the Computer to the NoteDock II" on
page 240 for instructions.
6 Turn the computer on and try setting up PC Card support
again.
A PC Card error occurs
Reinsert the card to make sure it is properly connected.
If the card is attached to an external device, check that the connec-
tion is secure.
Refer to the card's documentation which should contain a trouble-
shooting section.
Printers
This section lists some of the most common printer problems.
The printer doesn't print.
Check that the printer is connected to a working power outlet and
is turned on.
Check that the printer has plenty of paper. Some printers won't
start printing when there are just two or three sheets of paper left in
the tray.
Make sure the printer cable is firmly attached to both the computer
and the printer.
If your printer is ECP- or IEEE 1284-compliant, make sure you
have an IEEE 1284 printer cable.
Run the printer's self test to check for any problem with the printer
itself.
Make sure you installed the proper printer drivers, as shown in
"Setting Up Windows 95 to Work with Your Printer" on page 98.
Part I: Getting To Know Your Computer
If Something Goes Wrong...
Fixing Device Related Problems
353