Choosing Test Options - Toshiba Tecra 500CS User Manual

25-diag.fm5 Page 453 Thursday, May 16, 1996 2:23 PM
6 Use the arrow keys to select Run Diagnostics and press
Enter
TDIAGS asks you to confirm that you want to run the
diagnostic test.
7 To run the diagnostic test, press
The following sections explain the diagnostic test options.

Choosing Test Options

Before the test begins, the program asks several questions about
which components you wish to test.
1 The first question asks if you want to test the diskette
drive(s). The computer displays:
Test the FDD (Y/N)?
2 To test the diskette drive(s), type
bypass the test, type
The FDD (floppy disk drive) test tests the computer's diskette
drive.
If you have installed the CD-ROM drive module in the Select-
Bay, make sure you attach the diskette drive before performing
this test.
The test writes test patterns on any disk in the drive. These
patterns destroy all information on the disk(s). Make sure
there is no information you want to keep on the disk(s)
you use.
If you choose the FDD test, you must format and write enable
these disks before the test. For 3 1/2" disks, move the write-
protect tab to cover the square hole.
Part II: Technical Reference
Choosing Test Options
.
and press
N
453
The Diagnostic Test
(for yes), and press
Y
and press . To
Y Enter
.
Enter
.
Enter