Toshiba Tecra 500CS User Manual page 124

000-book.bk : 04-basic.fm5 Page 123 Wednesday, May 15, 1996 3:50 PM
Installing the Main Hard Drive
To install the main hard drive, follow these steps:
1 Place the hard drive in the hard drive slot.
Locating the lever
2 Push the small lever at the front of the slot to the right.
The hard drive drops into the slot.
3 Push the hard drive back into the hard drive slot so the
drive joins firmly to the connector inside the slot.
Be certain the hard drive is joined to the connector in the hard
drive slot Do not push on the top of the drive. Press forward
on its outer edge. If the hard drive isn't connected, the com-
puter starts and goes through the memory check, but hangs
when it cannot access the hard drive.
4 Fold the handle back against the hard drive.
5 Replace the hard drive cover.
6 Slide the hard drive cover lock to the left to lock the cover.
Part I: Getting To Know Your Computer
Learning the Basics
Changing the Main Hard Drive
123
Lever