Toshiba Tecra 500CS User Manual page 259

000-book.bk : 12-cstm.fm5 Page 280 Thursday, May 16, 1996 2:07 PM
280
Making Life Easier
Saving Time with Multiple Configurations
Creating Your Own Configuration
To use one of the blank buttons to create your own configuration,
follow these steps:
1 Click the blank configuration button.
2 Click Enable.
The Enable Configuration dialog box opens.
The Enable Configuration dialog box
3 Enter a name for the configuration in the Name box.
4 Assign the icon for the button.
The procedure for assigning the icon using this dialog box is
the same as the procedure for assigning the icon using the Con-
figuration Properties dialog box. See "Creating Your Own
Button Icon" on page 277.
5 Choose one of the existing configurations from which to
copy the hardware and application settings.
You must copy settings from an existing configuration when
you create a new one. In the next section you'll see how to
change the settings for your new configuration.
Part I: Getting To Know Your Computer