Adjusting The Position Of The Projected Image (Lens Shift) - Epson EB-G6170 User Manual

Installing the Projector
Top Menu Name
Settings
Extended
* Except for custom settings of gamma
a
To set menu items that cannot be set while the test pattern is
being displayed or to fine-tune the projected image, project an
image from the connected device.
c
Press the [Esc] button to close the test pattern.
Adjusting the Position of the Projected Image
(Lens Shift)
The lens can be shifted to adjust the position of the projected image, for
example, when the projector cannot be installed directly in front of the
screen.
Sub Menu/Items
Geometric Correction s p.51
Multi-Projection
- Brightness Level
- Edge Blending s p.66
- Multi-screen s p.68
The ranges within which the image can be moved are shown below. The
position of the projected image cannot be moved to both the horizontal and
vertical maximum values.
EB-G6770WU/EB-G6570WU/EB-G6470WU/EB-G6270W/EB-G6070W
A
Center of lens
B
Projected image when lens shift is set in the center
C
Maximum motion range: V x 67%
D
When the horizontal direction is at the maximum value: V x 27%
30