Administrator Settings Menu - Epson EB-G6170 User Manual

List of Functions

Administrator Settings menu

Submenu
Enter the password for the Administrator Settings menu for
Administrator
Password network settings.
You can enter up to 16 single-byte alphanumeric characters.
(* cannot be used.)
If the administrator password is not set, click OK with an empty
password box.
This name is used to identify the projector on a network. Use for
Network Host
Web control, "Connect to a Network Projector" and so on.
Name
When editing, you can enter up to 15 single-byte alphanumeric
characters. (The only symbols you can use are - _. The first
character should be a letter, and the last character should be a
letter or a number.)
Set a password to use when you access the projector using
PJLink Password
compatible PJLink software.
You can enter up to 32 single-byte alphanumeric characters.
(Symbols cannot be used.)
s "About PJLink"
Function
p.167
Submenu
Web Control Set a password to use when making settings and controlling the
Password projector using Web Control. You can enter up to 8 single-byte
alphanumeric characters. (* cannot be used.) Web Control is a
function that allows you to set up and control the projector by
using the Web browser on a computer connected on a network.
s "Changing Settings Using a Web Browser (Web Control)"
p.160
Set a password to use EasyMP Monitor.
Monitor Pass-
word
You can enter up to 16 single-byte alphanumeric characters.
(* cannot be used.)
Secure HTTP To strengthen security, communication between the projector
and computer in Web control is encrypted. When setting
security with Web control, it is recommended to set this to On.
Goes to the Mail Notification setting menu.
Mail Notification
s "Mail Notification menu"
Goes to the Manage Certificates settings menu.
Manage Certifi-
cates
s "Manage Certificates menu"
SNMP Goes to the SNMP settings menu.
s "SNMP menu"
Priority Gateway For the priority gateway, select either Wired or Wireless.
When you want to allow the projector to be detected by AMX
AMX Device Dis-
Device Discovery
covery
connected to an environment controlled by a controller from
AMX or AMX Device Discovery.
Crestron Room- Set this to On only when monitoring or controlling the projector
View over the network using Crestron RoomView
this to Off.
s "About Crestron RoomView
Changes in projector settings take effect upon restarting.
When this is set to On, the following functions are not available.
• Web control
• Message Broadcasting (EasyMP Monitor plugin)
Function
p.110
p.111
p.112
g
, set this to On. Set this to Off if you are not
®
. Otherwise, set
®
" p.167
109