Epson EB-G6170 User Manual page 107

List of Functions
When WPA/WPA2-EAP is selected
Submenu
Set the protocol for authentication.
EAP Method
PEAP: Authentication protocol widely used in Windows Server.
PEAP-TLS: Authentication protocol used in Windows Server.
Set when using client certificate.
EAP-TLS: Authentication protocol widely used to use a client
certificate.
EAP-Fast, LEAP: Select this when these authentication
protocols are used.
Function
Submenu
User name Enter a user name to be used for authentication. You can enter up
to 64 single-byte alphanumeric characters.
If you select PEAP-TLS or EAP-TLS, the user name obtained
automatically from the client certificate is displayed. You can
change the user name if the authentication server requires
another user name.
You can enter up to 32 characters on the Configuration menu.
When entering more than 32 characters, use your Web browser
to enter the text.
s "Changing Settings Using a Web Browser (Web Control)"
p.160
If you also need to enter a domain name, add the domain name
before the user name separated by a backslash.
Password Enter a password to be used for authentication. You can enter up
to 64 single-byte alphanumeric characters. When the password is
entered and Finish is selected, the value is set and displayed as an
asterisk (*).
You can enter up to 32 characters on the Configuration menu.
When entering more than 32 characters, use your Web browser
to enter the text.
s "Changing Settings Using a Web Browser (Web Control)"
p.160
Displays the Issued to, Issued by, and Validity period
Client Certificate
information set in the stored client certificate. It is blank if the
certificate is not set.
Set to On to perform verification for the authentication server
Verify Server
certificate. To verify a server certificate, you need to set CA
Certificate
certificate.
s "Setting certificates"
CA certificate Displays the Issued to, Issued by, and Validity period
information set in the stored CA certificate. It is blank if the
certificate is not set.
107
Function
p.161