Installing the Projector
a
The Screen Position cannot be adjusted in the following situations.
• If you are using a WUXGA/WXGA projector and the Screen Type
is set to 16:10
• If you are using an XGA projector and the Screen Type is set to
4:3
Displaying a Test Pattern
A test pattern can be displayed to adjust the projection status without
connecting video equipment.
The shape of a test pattern is according to the setting of Screen Type. Set
Screen Type first.
"Screen Settings"
p.27
s
a
Press the [Test Pattern] button of the remote control or the [
button on the control panel while projecting.
b
Press the [ ][ ] buttons on the remote control or the [
on the control panel to change the test pattern.
Using the remote control
]
The following image adjustments can be made while the test pattern
is being displayed.
Top Menu Name
Image
Signal
Using the control panel
Sub Menu/Items
Color Mode s
p.56
Color Temp.
Advanced
*
- Gamma
p.60
s
- RGB
- RGBCMY s
p.60
Reset
Auto Setup
29
] button