Resetting The Lamp Hours; Replacing The Air Filter; Air Filter Replacement Period; How To Replace The Air Filter - Epson EB-G6170 User Manual

Replacing Consumables
Attention
• Make sure you install the lamp and lamp cover securely. If the lamp cover is
removed, the lamps turn off automatically as a safety precaution. If the lamp
or the lamp cover is not installed correctly, the lamp will not turn on. Install
the lamp cover so that it will fit precisely and not be deformed.
• This product includes a lamp component that contains mercury (Hg). Please
consult your local regulations regarding disposal or recycling. Do not dispose
of it with normal waste.

Resetting the lamp hours

The projector records how long the lamp is turned on and a message and
indicator notify you when it is time to replace the lamp. After replacing the
lamp, make sure you reset the Lamp Hours from the Configuration menu.
"Reset Menu" p.114
s
a
Only reset the Lamp Hours after the lamp has been replaced.
Otherwise the lamp replacement period is not indicated correctly.

Replacing the Air Filter

Air filter replacement period

If the message is displayed frequently even though the air filter has been
cleaned, replace the air filter.

How to replace the air filter

The air filter can be replaced even when the projector is suspended from a
ceiling.
a
After you turn off the projector's power and the confirmation
buzzer beeps twice, disconnect the power cord.
b
Open the air filter cover.
Slide the air filter cover operation knob, and open the air filter
cover.
c
Remove the air filter.
Grip the tab in the center of the air filter, and pull it straight out.
147