Epson EB-G6170 User Manual page 67

Multi-Projection Function
Submenu
Edge Blending
Top Edge/Bottom
Edge/Right Edge/Left
Edge
Blend Curve
Guide Display
Pattern Guide
Guide Colors
Function
Set to On to activate the edge blending function.
Set to Off when not projecting from multiple
projectors.
Blending: Set to On to activate the edge blending
function towards where you are setting, and the
brend range will be shaded.
Blend Range: Adjusts the range to be shaded.
Adjustment is possible at the level of one pixel. The
maximum range is 45% of the resolution.
You can select from three ways of shading.
Set to On to display the guide on the edge blending
setting range.
Set to On to display a guide to match the position of
the edge blending setting range.
You can select the combination of guide colors
from the three.
d
Turn on Edge Blending.
(1)
Select Edge Blending, and then press the [
(2)
Select On, and then press the [
(3) Press the [Esc] button.
e
Display the guide.
(1)
Select Guide Display, and then press the [
(2)
Select On, and then press the [
(3) Press the [Esc] button.
a
If the guide is not clear, you can change the color of the guide
on Guide Colors.
f
Display a pattern.
(1)
Select Pattern Guide, and then press the [
(2)
Select On, and then press the [
(3) Press the [Esc] button.
g
Set Top Edge/Bottom Edge/Right Edge/Left Edge.
(1) Select Top Edge/Bottom Edge/Right Edge/Left Edge to set the edge
blending, and then press the [
(2)
Select Blending, and then press the [
(3)
Select On, and then press the [
(4) Press the [Esc] button.
67
] button.
] button.
] button.
] button.
] button.
] button.
] button.
] button.
] button.