Frame Interpolation (Eb-G6770Wu/Eb-G6570Wu/Eb-G6470Wu Only); Projecting 3D Images - Epson EB-G6170 User Manual

Adjusting Projected Images
Frame Interpolation (EB-G6770WU/EB-G6570WU/EB-G6470WU
only)
The current and previous frames are used to create intermediate frames,
interpolating to produce smooth-moving images. You can resolve clumsy-
moving images, such as frame skipping when projecting a fast moving
image.
Make settings from the configuration menu.
Signal - Frame Interpolation
s
p.93
You can select the level of interpolation: Low, Normal or High. Set to Off
if noise occurs after setting them.

Projecting 3D images

By using two projectors, you can project passive 3D images. You need the
following optional items to project and view 3D images. Make sure you
read the notes in the user's guides supplied with the optional items.
• Polarizer (ELPPL01)
• Passive 3D Glasses (ELPGS02A/ELPGS02B)
"Optional Accessories" p.172
s
When projecting 3D images, set 3D Images to On from the Configuration
menu.
Signal - 3D Setup - 3D Images
s
p.93
62