Epson EB-G6170 User Manual page 104

List of Functions
Submenu
Connection Set the connection mode to use when connecting the projector
Mode and a computer via a wireless LAN.
If you select Quick, a small network is created automatically by
the projector and computer. It is used with EasyMP Network
Projection. If SSID Auto Setting is set to On, the projector
becomes an easy access point; if it is set to Off, the network is
created in Ad hoc mode
If you select Advanced, the connection is established in
Infrastructure mode
monitoring or controlling the projector over the network, set
Advanced.
SSID Auto Set- If Connection Mode is set to Quick, when you set this to On, you
ting can search for the projector more quickly from among multiple
projectors. SSID is set automatically.
When connecting to multiple projectors from one computer in
Quick, set this to Off, and set the same SSID in all the projectors
that will connect.
SSID Enter an SSID. When an SSID is provided for the wireless LAN
system in which the projector participates, enter the SSID.
You can enter up to 32 single-byte alphanumeric characters. (^
cannot be used.) Set SSID to blank or ANY to establish an ANY
connection.
When Connection Mode is set to Advanced, you can search for
Search Access
surrounding access points, and set the SSID to be connected from
Point
those access points. Depending on the access point settings, they
may not be displayed in the list. You must set security separately.
s "Search Access Point screen"
You can select the channels used to connect in Quick mode. If
Channel
interference from other signals occurs, use a different channel.
To prevent the SSID from being displayed on the LAN Standby
SSID Display
screen, set this to Off.
DHCP You can set whether or not (On/Off) to use DHCP
If this is set to On, you cannot set any more addresses.
Function
g
.
g
through the access point installed. When
p.105
g
.
Submenu
IP Address You can input the IP Address
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used. 0.0.0.0,
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from
0 to 255)
Subnet Mask You can input the Subnet Mask
a number from 0 to 255 in each field of the address. However, the
following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Ad- You can input the IP address for the gateway for the projector.
dress
You can enter a number from 0 to 255 in each field of the address.
However, the following Gateway Address
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
To prevent the IP address from being displayed on the LAN
IP Address Dis-
Standby screen, set this to Off.
play
This is a specific string of the wireless LAN module.
Region Code
104
Function
g
assigned to the projector.
g
for the projector. You can enter
g
cannot be used.