Reset Menu - Epson EB-G6170 User Manual

List of Functions
Submenu
Web Server Cer- (This item can only be set when Secure HTTP is set to On.)
tificate
The Issued to, Issued by, and Validity period information on
the certificate set in the projector is displayed. This information
is not displayed when a Self-signed Certificate is set.
Select Clear to delete the stored certificate.
a
Web Control is used to set certificates.
s "Setting certificates"
SNMP menu
Submenu
SNMP Set to On to monitor the projector using SNMP
the projector, you need to install the SNMP manager program on
your computer. SNMP should be managed by a network
administrator. The default value is Off.
Function
p.161
Function
g
. To monitor
Submenu
Trap IP Address You can register up to two IP addresses for the SNMP trap
1/Trap IP Ad- notification destination.
dress 2
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from
0 to 255)
Set the community name of SNMP. You can enter up to 32 single-
Community
Name byte alphanumeric characters. (As for symbols, only @ can be
used.)

Reset menu

Resets all of the network settings.
112
Function