Epson EB-G6170 User Manual page 58

Adjusting Projected Images
Aspect Mode
Full Projects at the full size of the projected screen.
Projects by enlarging the input image to the full width of
Zoom
the projected screen while retaining the aspect ratio. Areas
that exceed the edges of the projected screen are not
projected.
Native Projects to the center of the projected screen at the
resolution of the input image. Areas that exceed the edges
of the projected screen are not projected.
a
• You can also set the aspect ratio from the Configuration menu.
s Signal - Aspect
• If parts of the computer image are missing, set the Resolution
setting to Wide or Normal from the Configuration menu, according
to the resolution of the computer.
s Signal - Resolution
The aspect mode changes as shown in the tables below.
The following colors in screen images in the tables indicate areas that are
not displayed.
: The area where the image is not displayed depending on the screen
type setting.
: The area where the image is not displayed depending on the aspect
mode setting.
EB-G6770WU/EB-G6570WU/EB-G6470WU/EB-G6270W/EB-G6070W
Screen type setting: 16:10
Explanation
p.93
p.93
Aspect Ratio of Input Signal
16:10
Auto or Normal
16:9
Full
Zoom
Native *
* The image may differ depending on the resolution of the input signal.
Screen type setting: 16:9
Aspect Ratio of Input Signal
16:10
Auto or Normal
Full
16:9 4:3
16:9 4:3
58