Displaying A Test Pattern - Epson PowerLite EBL630U User Manual

Note: This feature is only available when the Aspect setting is set to Auto for the HDMI, Computer, and
HDBaseT sources. It is not available when projecting split screen images.
1. Turn on the projector and display an image.
2. Press the following buttons on the remote control to position the image:
• 4: positions the image to the left side of the screen
• 5: positions the image in the center of the screen
• 6: positions the image to the right side of the screen
3. When you are finished, press Esc.
Note: The adjusted image location is only saved until the projector is turned off.
Parent topic:

Displaying a Test Pattern

You can display a test pattern to adjust the projected image without connecting a computer or video
device.
Note: The test pattern's shape is determined by the Screen Type setting. Be sure to set the correct
screen type before adjusting with the test pattern.
1. Turn on the projector.
2. Press the down arrow button on the control panel.
Note: You can also display a test pattern from the Installation menu using the remote control.
Using Basic Projector Features
132