Table of Contents
Advertisement
Network Setup
Submenu
Password
Enter a password to be used for authentication. You can enter up
to 64 single-byte alphanumeric characters. When the password is
entered and Finish is selected, the value is set and displayed as an
asterisk (*).
You can enter up to 32 characters on the Configuration menu.
When entering more than 32 characters, use your Web browser
to enter the text.
Displays the Issued to, Issued by, and Validity period
Client Certificate
information set in the stored client certificate. It is blank if the
certificate is not set.
Set to On to perform verification for the authentication server
Verify Server
certificate. To verify a server certificate, you need to set CA
Certificate
certificate.
s "Setting Certificates"
Displays the Issued to, Issued by, and Validity period
CA certificate
information set in the stored CA certificate. It is blank if the
certificate is not set.
Set to On to perform authentication of the server name during
Setting RADIUS
server certificate verification. By specifying the server name, you
Server Name
can reduce the risk of connecting to an invalid authentication
server.
RADIUS Server
Specify the authentication server name.
Name
You can enter up to 32 single-byte alphanumeric characters. (^
cannot be used.)
Set to On to perform verification of the certificate's validity
Verify Exp. date
period during server certificate verification.
of Server Cert.
Function
p.57
Administrator Settings menu
Submenu
Enter the password for the Administrator Settings menu for
Administrator
Password
network settings.
You can enter up to 16 single-byte alphanumeric characters. (*
cannot be used.)
If the administrator password is not set, click OK with an empty
password box.
This name is used to identify the projector on a network. Use for
Network Host
Web control, "Connect to a Network Projector" and so on.
Name
When editing, you can enter up to 15 single-byte alphanumeric
characters. (The only symbols you can use are - _. The first
character should be a letter, and the last character should be a
letter or a number. )
Set a password to use when you access the projector using
PJLink Password
compatible PJLink software.
You can enter up to 32 single-byte alphanumeric characters.
(Symbols cannot be used.)
54
Function
Advertisement
Table of Contents
